Comtrol RocketPort 550 uPCI Linux - Manual (Page 8)

8
Copying files ......Done
Adding insmod command to /etc/rc... directories...Done
Next, you are asked if you want to load the drivers now. If you have already fitted
the RocketPort 550 cards into the system (as we suggest you do), then you should
choose ‘Y’ here.
If you have not installed the cards yet, or have other administration tasks that will
need a reboot, you can say ‘N’ for no.
Do you want to install the RocketPort module now. If you don't do it
now, then you will have to reboot before the serial ports can be
used.
Please enter [Y]es or [N]o [.]
If you say Yes, and you’re running on the System Console (not in X-Windows),
then you’ll see messages from the RocketPort 550 driver confirming that it has
successfully loaded and listing any boards it detects. The MAJOR and callout
numbers may differ on your system.
Rckt550: Direct MAJOR is 253, callout is 252.
Comtrol Europe RocketPort 550 Linux Drivers installation Complete
Your RocketPort 550 Linux Drivers are now installed
Remove the driver distribution media from the drive