Comtrol ES9528-XT Quick Start - Manual (Page 7)

6
9. Optionally, select the appropriate Network Topology, which is an
informational field.
10. Click the Apply Changes button.
11. Click Close to return to the main screen.
12. You are now ready to configure the ES9528 features.
FEATURE CONFIGURATION
The ES9528 provides both in-band and out-band configuration methods:
•
Out-band management means that you configure the ES9528 using the
RS-232 console cable and the Command Line Interface (CLI) to access
the ES9528 without attaching an admin PC to the network. You can also
use out-bound management, if you lost the network connection to the
ES9528.
• In-band management means that you connect remotely using the
ES9528 IP address through the network. You can remotely connect with
the ES9528 Java applet web interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES9528 features.
Refer to the RocketLinx ES9528/ES9528-XT User Guide for other configuration
methods.
1. If necessary, install the latest version of the Java Runtime Environment,
which is required to run the web management interface.
2. Open a web browser and enter the IP address of the ES9528.
3. Click Run when Java prompts you to run the applet.
4. Enter admin for both the user name and the password when prompted.
5. Use the web interface to configure your device as needed for your
network.
You can use the help system or the RocketLinx ES9528/ES9528 User Guide for
information about configuring ES9528 features.