Comtrol ES9528-XT Quick Start - Manual (Page 2)

INTRODUCTION
The RocketLinx ES9528 and ES9528-XT are rack mount 24+4G managed
industrial Ethernet switches that are equipped with 24 10/100 BASE-TX ports
plus four Gigabit RJ45 / mini GBIC combo ports. This special design is perfect
for control rooms where high-port density and performance are required.
The four Gigabit combo port design allows 10/100/1000BASE-TX, and the SFP
ports accept all types of Gigabit SFP transceivers, including Gigabit SX, LX, LHX,
ZX, and XD for several connection types and distances.
The RocketLinx ES9528 and ES9528-XT are referred to as the ES9528 in this
guide.
See the Comtrol web site for detailed product specifications for your model.
INSTALLATION OVERVIEW
You can use the following overview to install the ES9528. If you need more
information, you can refer to the RocketLinx ES9528/ES9528-XT User Guide,
which contains installation and configuration information to install the
ES9528.
Connect the Power and Ground
1. Connect the power cord to the AC power input connector. The available
AC power input range is from 90 to 264VAC.
2. Mount the ES9528 into the rack
a. Ground the ES9528 using the earth ground screw on the back of the
unit. Loosen the ground screw with a screwdriver; then tighten the
screw after earth ground wire is connected.
b. Attach the brackets to the ES9528 by using the screws provided in the
rack mount kit.
c. Mount the ES9528 in a 19-inch rack by using four rack mounting
screws provided in the kit.
Note: When installing multiple switches in high temperature
environments, reserve 0.5U-1U of free space between the switches.
1