Clippasafe 114 Deluxe Extendable, Dual Fix, No-Trip Gate - Manual (Page 5)

5
6
Place the gate in the desired opening and push the latch downwards
gently. The screw adjusters will extend and the latch should ‘click’ into
place indicating that the gate is secure. If you feel a lot of resistance STOP
and screw the screw adjusters further into the frame. Check the pressure
indicators on the frame. When the gate is under no pressure, there should
be no metal visible in the viewer. When the gate is under pressure the
metal in the viewer should line up with the line on the frame indicating
that the gate is under enough pressure.
If the metal in the viewer does not line up with the lines on the frame the
screw adjusters need to be adjusted. Open the latch and unscrew each
of the screw adjusters to increase the pressure.