Compaq V300 - Manual (Page 99)

Removal and Replacement Procedures 5-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: The Integrity Group Saved by: The Integrity Group Saved date: 10/26/00 12:36 PM
Part Number: 128679-006 File name: Ch05
Installing a Modem or Modem/Network Interface Card
1. Remove the mini PCI slot cover.
2. Remove the two screws
1
that secure the modem or modem/NIC
to the system board (Figure 5-4).
3. Make sure the appropriate RJ11/RJ45 covers are removed from the
base enclosure.
4. Install the card into the mini PCI slot, making sure to seat the card
connector on the system board
2
.
Figure 5-4. Installing a Modem or Modem/Network Interface Card
Reverse the installation procedure described above to remove a modem
or modem/Network Interface Card.