Cisco 700 - Manual (Page 83)

Specifications A-3
Serial Configuration Port
Table A-3 shows the pinouts for the configuration port.
The console port is configured as a data communications equipment (DCE) device. The
default parameters for the console port are as follows:
•
Bits per second = 9600
•
Data bits = 8
•
Parity = None
•
Stop bits = 1
Table A-3 Configuration Port Pinouts (DB-9)
Pin Function
1 Carrier Detect (CD)
2 Received Data (RXD)
3 Transmitted Data (TXD)
4 Data Terminal Ready (DTR)
5 Signal Ground
6 Data Set Ready (DSR) input
7 Not used
8 Not used
9 Not used