Cisco 700 - Manual (Page 84)

Cisco 700 Series Router Installation Guide
Common Port Assignments
A-4
Power Connector
Table A-4 shows the pinouts for the router power connector, and, Figure A-1 shows the
location of the power connector pins.
Figure A-1 Power Supply Comnnector
Common Port Assignments
Table A-4 lists currently assigned TCP port numbers. To the extent possible, UDP uses the
same numbers.
Table A-4 Power Supply Cable (Mini DIN Plug)
Pin Voltage Current Tolerance
1 Ground – 1
1 A dash indicates that the information does not apply to the pin.
–
2 +5 VDC 1.5A +/– 5%
3 Ground – –
4 +5 VDC 1.5A +/– 5%
5 Not used – –
6 +30 VDC 0.2A +/– 25%
7 Not used – –
1
3
5
2
4
6
7
H6089