Cisco 700 - Manual (Page 109)

Provisioning the ISDN BRI Line C-13
Configuration for Router Only on ISDN Line
Table C-10 lists the router configuration requirements when using the router only on a
Northern Telecom DMS-100 ISDN line.
Configuration for Router and One Additional Device on ISDN Line
Table C-11 lists the router configuration requirements for using a Northern Telecom
DMS-100 switch when using the router and one additional device on the ISDN line.
Note In this configuration, the router can use only one B channel.
Table C-10 Northern Telecom DMS-100—Router Only
Parameter Configuration Software Command
Router software U.S. version Note
1
1 This parameter is not set with a software command.
Switch type DMS set switch
SPIDs Two required set spid
Directory number Two required set directory number
Table C-11 Northern Telecom DMS-100—Router and One Additional
Device
Parameter Configuration Software Command
Router software U.S. version Note
1
1 This parameter is not set with a software command.
Switch type DMS set switch
SPIDs One required set spid
Directory number One required set directory number