Cisco 700 - Manual (Page 108)

Cisco 700 Series Router Installation Guide
Router Configuration Requirements
C-12
Multipoint Configuration
Table C-9 lists the router configuration requirements when using an Lucent 5ESS Custom
switch in a multipoint configuration.
Configuration Requirements for Northern Telecom DMS-100
Switch
This section describes the router configuration requirements when using Cisco 700 series
routers with a Northern Telecom DMS-100 switch.
Table C-9 Lucent 5ESS Custom Multipoint Configuration
Parameter Configuration Software Command
Router software U.S. version Note
1
1 This parameter is not set with a software command.
Switch type 5ESS set switch
SPIDs At least one required
2
2 The Cisco 765, Cisco 766, Cisco 775, and Cisco 776 require two SPIDs so that the basic telephone service
ports (POTS) operate correctly.
set spid
Directory number Optional (recommended) set directory number