Toshiba KV-5124A - Manual (Page 9)

Control Operation Function
CLOCK SET buttons Press the button to set the
time.
When the button is pressed, the position indicating
the day will blink on the TV screen.
Using the
SET button and MEMORY button, set the
calendar and time.
PGM (Program) button Press the button to program the
timer. * When the button is pressed, calendar display will
change to the program display on the TV screen.
Using the
SET button and MEMORY button, set the
recording day, start and stop time.
* Two reservations can be programmed for each day
of the week, from Monday to Sunday.
* Daily programming is available.
SET - button Press the button to set the tíme
and program the timer. • When the button is pressed, the display will
advance in the reverse direction.
• When the button is held down, the display will
change continuously.
SET + button Press the button to set the time
and program the timer. • When the button is pressed, the display will
advance in the normal direction.
• When the button is held down, the display will
change continuously.
MEMORY button Press the button to store the
display to be set. When the button is pressed, the figures displayed on
the TV screen will be stored in the memory. Then, the
display will move to the next character to be set, and
blink.
CFM {Confirmation)/
SKIP button To confirm the timer
programming, stop the VCR
and press this button. Pressing this button displeys the programmed
contents on the TV screen. Pressing the
SET button
enables the programmed contents to be changed.
Press the
CFM/SKiP button to return to the calendar
display on the screen.
To clear the timer
programming, press
PGM
(program) button to display
PGM mode, and press this
button
Press the SET button to display the unwanted
program for recording. Press the CfM/SKIP button.
The "'SKIP” indicator replaces the recording start and
end times. The program will not be recorded. Press
the button again to return to display the programmed
recording start and end times.
8