Toshiba KV-5124A - Manual (Page 16)

Basic Playback
Before attempting playback, turn off the REC LOCK/RESTART switch.
Switch on the power.
Insert the cassette tape.
Press the button.
(i) Select the playback time mode.
Notes
If a power failure occurs with the REC LOCK/RESTART
switch on, this VCR will enter record mode automatically.
If the PAUSE button is pressed during playback, this machine
will pause. To release it, press the /'¿.4/button or PAUSE
button again. If pause is continued for longer than about 10
minutes, this machine will return to the playback state.
• Some tapes may not be played back because of the recording
mode in which they were recorded.
Recorded Time Modes Reproducible Time Modes
2, 12, 24 hours 2 h 1 2 24 hours
Playback in Various Ways
This VCR is designed to quickly review the contents of recorded tape.
Carefully read the following description, and become familiar with the operation, during playback.
Selection Operation Function
To playback a tape recorded in time
lapse mode. Set to any one of time modes [12
or 24 hours). Tape can be played in slow mode.
To quickly check the contents of a
tape recorded in time lapse mode. Select 2 hour mode or press the FF
button.
Tape can be played back in quick motion:
norma! speed or 5 times normal speed.
To playback a tape recorded in time
lapse mode.
Press the REW button. Tape can be played back in reverse quick
motion: 5 times normal speed.
To analyze a certain scene during
playback.
Press the PAUSE button, then FiELD
button.
Fields of the picture can be fed one by
one in playback. Keep the
FiELD button
pressed to slow the playback speed to
about 1/30 of the normal speed.
To take a single field. Press the PAUSE button. Field still pictures can be obtained.
15