Tracking, Field tracking, Playback adjustment procedure – Toshiba KV-5124A User Manual

Page 17: Playback of alarm recordings

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playback Adjustment Procedure

Carefully read the following descriptions to obtain optimum performance.

---------------TRACKING —

TRACKING

Noise appears in the picture during 2 hour playback*

• Adjust TRACKING to get a clearer picture*

FIELD TRACKING

• Adjust FIELD TRACKING to get a clearer picture when

noise appears on the screen in FIELD mode*

Note: Noise appears when a tape recorded in 2-hour

mode is played back.

In the case of 12 or 24 hour modes, noise cannot be elimi

nated by adjusting "TRACKING'

"FIELD TRACKING".

TRACKING

field

TRACKING

Playback of Alarm Recordings

This VCR is designed for quick review of the contents of the alarm recordings, Carefully read the following descriptions, and

become familiar with each operation.

Selection

Operation

Function

To play back a tape immediately after

aiarm recording or repeatedly play
back a certain segment of a tape.

Clear the counter to "0000" by
pressing the counter reset button at

the point on the tape which you want
to check.

Press the

COUNT. MEMORY

button.

The counter memory lamp on the

mode display will light. In this
condition, fast-forward or rewind the
tape.

The tape will automatically stop at

around "0000".

To Quickly review the tape recorded in

alarm record mode.

Press the

COUNT. MEMORY

button to

turn on the alarm memory lamp. In
this condition, fast-forward or rewind
the tape.

Still field mode will automaticaily start
at the point of the tape where the
alarm signal is recorded. Press the

PAUSE

button or

PLAY

button to start

replay.

To quickly find alarm recording date

{weekdays)

Press the

ALARM RECALL

button in

stop mode.

Alarm information on AL1 to ALB

(year, month, date, day of the week,

hour, minute, second) will automatically
appear in sequence on TV display,
starting with latest one (AL1) at 5
seconds intervals. After ALB is
displayed, this function is released.

To check the number of alarm
recordings

Press the

COUNT,

butters to show the

alarm counter on the display panel,

The number of alarm recordings will
appear up to "99".