Toshiba TEC B-30 Series User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM 1-33004
2. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing is not performed.
It is recommended to clean the head with thermal head cleaner before loading a
new ribbon,
1. Turn the power off.
2. Open the front door.
3. Move the head lock lever to the right to release the print head.
4. Remove the ribbon if it has been loaded.
5. Move the supply back past the top of the paper guide.
6. Rub back and forth across the print head using thermal head cleaner.
7. Reload the supply and/or ribbon.
WARNING: Turn the power off before cleaning the print head.
WARNING: Be careful NOT TO DAMAGE the print head when cleaning.
5-3