Toshiba TEC B-30 Series - Manual (Page 40)

EM 1-33004
1. Turn the power off.
2. Insert the memory card with preregis­
tered print data into the memory card
slot.
3. To prevent the memory card from being
removed accidentally, be sure to attach
the memory card cover.
WARNING; Replace battery with Hitachi Maxell Ltd., type CR2016
only. Use of another battery may present a risk of fire
or explosion.
WARNING: A battery may explode if handled improperly. DO NOT
recharge, disassemble or dispose of in fire.
NOTICE: The data is protected by a backup battery which is
installed inside the memory card. The service life of the
battery is eighteen (18) months. To replace the battery,
consult your TEC dealer or service representative.
If the memory card is used with an expired battery,
correct operations are not guaranteed by TEC.
3. INSERTING THE MEMORY CARD
Memory
Card
Memory Card
Cover
Figure 4-21,
4-11