For b-30-s2/h2/c2/s3/h3/c3/as2/as3/ah3, For b-30-s2/h2/c2/s3/h3/c3/as2/as3/ah3 - 6 – Toshiba TEC B-30 Series User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.2. For B-30-S2/H2/C2/S3/H3/C3/AS2/AS3/AH3
EM 1-33004
The printer prints both tags and labels.
1. Turn the power off.
2. Place the supply roll onto the supply roll holder.
3. Open the front door.
4. Move the head lock lever to the right to release
the print head.
5. Press down the roller open lever to release the skew roller.
Figure 4-15.
6. Thread the supply as shown.
a. Pull enough supply out from the roll to reach the paper setting zone.
b. Slide the supply under the paper guide, and push the inside edge of the supply
against the back wall.
Figure 4-16.
4-6