beautypg.com

Basic operations, Turning on and off, Ohoosing tv ohannel – RCA 40LA45RQ User Manual

Page 20: Selecting input source, Adjusting tv stand angle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Basic Operations

Turning On and Off

Connect the AC cord to power the LCD TV. At this time the TV wiii enter standby mode and power indicator shows red.

Use Power button (O) on the side panei of TV or on the remote controi to turn on the TV. After switching off the TV for 5 seconds,

you can turn on TV again.

Ohoosing TV Ohannel

Tuning To Analog Channels

An analog channel has a channel number beginning with “A”. Input the digital number with numeric buttons directly and press

ENTER button to confirm.

For example, to watch analog channel “A51”, press “5”, “1”, “ENTER” on remote control in sequence.

Note:

Although there is no analog TV signal available in America, we reserve ATV functions for some expansible use.

Tuning To Digital Channels

A digital channel has a channel number beginning with “D”. Input the main digital number with numeric buttons directly, then press

“ — ” button on remote control, and input the sub number at last.

For example, to watch analog channel “D31 -1 ”, press “3”, “1 ”, “ — ” button. “ENTER” on remote control in sequence.

Changing Channels Dlreotly

You can use CH+ button to increase channel number and CH- to decrease channel number. When no OSD (On Screen Display) is

used, the up/down arrows can also work as OH+/OH- buttons.

Selecting Input Source

I

Press INPUT button on remote control to display Source Select list.

Use up/down arrows to highlight the source you need and press ENTER to confirm.

Adjusting TV Stand Angle

The TV cabinet can manually adjust to left or right for 30 degrees from the centre.

You can adjust the angle for the best viewing effect and comfort.

19