Tape remain button, Cassette compartment, Shift < / > button – Toshiba KV-9096A User Manual
Page 7: Time mode a v /set+ - buttons, Location select button > / v, Tracking buttons ( a / v ), Play button, Stop button, Pause/still button, Shuttle dial
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE REMAIN button
The approximate time remaining on the tape is displayed
on the counter (in a 2 hour scale using a T-120 tape) while
this button is being pressed.
CASSETTE COMPARTMENT
Insert a cassette into this compartment to load the tape.
DISPLAY button
Press to display the MENU screen and change the
settings.
SHIFT < / > button
Press to select a desired menu on the screen.
TIME MODE A V / S E T + - buttons
• Press either of the buttons to set the recording time
mode and playback time mode.
• Press either the + or the - button to set the mode and
the numerical value for each menu on the screen.
LOCATION SELECT button > / v
Press to change the position of superimposed characters
on the screen.
TRACKING buttons ( A / v )
Adjust to eliminate noise from playback picture.
PLAY button
Press to start the playback mode.
STOP button
Press to stop tape running.
PAUSE/STILL button
• Press during recording to pause recording.
• Press during playback for a still picture.
SHUTTLE dial
Turn this dial clockwise and hold:
• To fast forward the tape during the stop mode.
• To operate the forward picture search during the play
back.
• To operate the forward slow play during the still mode.
Turn this dial counter clockwise and hold:
• To rewind the tape during the stop mode.
• To operate the reverse picture search during the play
back.
• To operate the reverse slow play during the still mode.
PICTURE control
Adjust to soften or sharpen the picture during playback.
Z
o
o
3
Q
O
DC