Toshiba KV-9096A - Manual (Page 35)

OPERATION AFTER TAPE END DETECTION
The VCR can be programmed to respond differently when the tape reaches its end. The following describes how to set the different
modes of operation.
How to Set to Stop at End of Tape
Press the DISPLAY
button.
DISPLAY vTiME M0D£/\
J SET < j J
< SHIFT > TRACKING
CD CD CD
LOCATION SELECT
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END=[DISPLAY]
Press the < or >
SHIFT button to blink
SETUP and press the +
SET button.
DISPLAY
CD
yTIME M0DE/\
SET
TRACKING
v^O
SHIFT ■
CD^O
LOCATION SELECT
CLOCK ADJUST
[ S E T U P S
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END=[DISPLAY]
Press the < or >
SHIFT button to blink
TAPE END MODE.
DISPLAY vTiMEMODEA,
CD t 1 SET tL 3 A.t'r^
< SHIFT > TRACKING
CD ▲CD vCD
LOCATION SELECT
S E T U P
ALARM REC TIME 15S
SPEED SPA 2
RESTART REC OFF
TAPE END MODE ISTOPi
ALARM STOP
MENU=[DISPLAY]
Press the + or - SET
button to set the opera­
tion after tape end
detection.
DISPLAY vTIMEMODE/\
CD O ^ CD / t O
^ ^ TRACKING
CD* CD VCD
LOCATION SELECT
S E T U P
ALARM REC TIME 15S
SPEED SPA 2
RESTART REC OFF
TAPE END MODE ISTOPi
ALARM STOP
MENU-=[DISPLAY]
Each time the + SET button is pressed, the display
changes as follows.
STOP ^ (REW STOP) ^ (REW REC)
______________________ I
Each time the - SET button is pressed, the display
changes in the reverse order.
Display Operation after detection of tape end
STOP Stops at tape end.
REW STOP Rewinds to beginning of tape and stops.
REW ^ REC
Set to carry out repeat recording.
Rewinds to beginning of tape and records.
oz
zo
5F=
oc<
occ
OUJ
UJO.
DCO
Caution: ----------------------------------------------------------------------------------------------------------------------------------------------
If you need Auto Rewind function even for the case that alarm recording starts during recording, please set TAPE END ALARM to
“CONT.” in the MENU SCREEN.
Note:
The buzzer, screen display and counter displays operate as follows depending on the setting for operations after tape end
detection.
Setting contents Buzzer Screen display Counter display
STOP Buzzer sounds at tape end TAPE END blinks Counter display blinks
REW ^ STOP Buzzer sounds at tape top TAPE END blinks Counter display blinks
REW ^ REC __--------------- ---- ------ —
34