Playback operation, Playback, Tracking adjustment – Toshiba KV-9096A User Manual
Page 40: Playback operation 9 - 4 3, Layback, Operation, Iu s
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
layback
operation
PLAYBACK
Turn the power ON for the monitor TV.
Press the PLAY button.
► PLAY ■ STOP
Insert a tape which has been recorded on.
Select the playback time mode.
r ______ ___
u H 3 o
a □
[ID
cm
TIME LAPSE VCR
cS
..P‘,,-
—
s
I
puay
I _ _ _ _
'--- ^ 1 1 1 1 1 ( 1 1
SP
► u u u u
VTIME M0DE/\
OSET O
Tracking Adjustment
Use the
V , A
TRACKING button to adjust when noise appears on the playback screen.
TRACKING
Press either v or
a
TRACKING button so that a
clearer picture is obtained.
When returning the tracking to a standard adjustment
value, press
a
and
v
buttons simultaneously.
Notes:
oo
m<
>cc.
s'“-
Q-O
When restart record is selected, and a power failure occurs, the VCR will automatically go into record mode when power is restored.
When the PAUSE button is pressed during playback, the VCR will go into still mode. To return to playback, press the PAUSE or
PLAY button. If the VCR is in still mode for longer 10 minutes the VCR will automatically resume normal playback.
When playing back tapes recorded in various time modes, the picture may be slightly unstable depending on the time mode.
Recording time mode
Time mode for piayback
SPA2, SPA12, SPA24, SP24, SP48, SP72,
SPL01, SPL02, SPL03
SPA2, SPA12, SPA24, SP24, SP48, SP72
EPA6, EPA18, EP30, EP48, EP72
EPA6, EPA18, EP30, EP48, EP72
39
Reverse playback is released after 1 minute and the VCR returns to normal playback.
The time mode cannot be changed during reverse playback (only in SPA2 and EPA6).
When playing back a tape that has been recorded in the modes which are excepted for SPA2 and EPA6, pay attention to the
following points.
• The picture may be somewhat horizontally unstable however, this is not a malfunction of the VCR.
• The upper section of the picture on the monitor screen may be distorted. This is not an abnormality.
The picture may be vertically unstable during playback in the modes which are excepted for SPA2 and EPA6. This is not an abnormality.
The advance Slow/Still playback images are Clean Slow/Still excepted of the bellow 2 images.
• The picture may be unstable during playback for images at Field Advance Slow/Still in SPA2 mode recorded, or for images at
Reverse Field Advance Slow/Reverse Still in EP mode. But those are not abnormality.
The picture may be unstable during reverse playback, but this is not an abnormality.
When returning to normal playback after picture search, the picture may wobble for a short while.
The screen will disturb when the tape passes from a SP record area to EP record area, or from an EP record area to SP record
area in one of the following playback modes: SP24 ~ SP72, EP30 ~ EP72 and Field advance slow. If this occurs, playback once
in the SPA2 or EPA6 mode, and then return to the original mode.