Activating the message alert, Activating call screening – Uniden Cordless Telephone User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15 seconds whenever you have a new message. To turn
on the message alert:
From the base or handset:
1) Press the
MENU
soft key. Select the ANSW. SETUP menu, and then the MESSAGE ALERT submenu.
2) Move the cursor to select ON or OFF.
3) Press the
OK
soft key. You will hear a confirmation tone.
Activating Call Screening
Your phone allows you to listen to callers leaving you a message. This, Call Screen, feature can be turned on or off.
From the base or handset:
1) Press the
MENU
soft key. Select the ANSW. SETUP menu and then the CALL SCREEN submenu.
2) Move the cursor to select ON or OFF.
3) Press the
OK
soft. You will hear a confirmation tone.
Setting a Security Code or Personal Identification Number (PIN)
To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number
(PIN) or PIN Code.
From the base or handset:
1) Press the
MENU
soft key. Select the ANSW. SETUP menu, and then the SECURITY CCDE submenu.
2) Enter a two-digit security code (01-99) using the number keypad
[0-9].
3) Press the
OK
soft. You will hear a confirmation tone.
56