Using the directlink feature – Uniden Cordless Telephone User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2) PRIVACY MODE ON will appear in the display for 2 seconds, but the |j| icon will appear and remain in the dis
play until the feature is turned off. Other stations will not be able to make a call and their display will list UN
AVAILABLE.
To turn Privacy off, press the
PRIVACY
soft key again. PRIVACY MODE OFF appears.
From the Base:
1) While on a call, press the
MENU
soft key.
2) Move the cursor to
CALL PRIVACY,
and then press the
OK
soft key. PRIVACY MODE ON will appear in the
display for 2 seconds, but the |jj icon will appear and remain in the display until the feature is turned off. Other
stations will not be able to make a call and their display will list UNAVAILABLE.
To turn Privacy off, repeat the procedures listed above. PRIVACY MODE OFF appears.
Using the DirectLink Feature
A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea
ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone
calls while in use. To activate, you must set both handsets to the DirectLink feature. While using
this feature, these two handsets will not be able to make or receive normal phone calls until this
operation is canceled; however, other handsets will function normally.
Note: If the party is out of range, NO SIGNAL appears in the display and the operation will be
canceled.
1) Press the
MENU
soft key. Select DIRECTLINK MODE menu.
2) Press the
OK
soft key. The display shows TO ENTER DIRECTLINK MODE PRESS
[ENTER].
3) Press the
ENTER
soft key. You will hear a confirmation tone, and DIRECTLINK MODE
COMPLETE appears in the display.
^_____
45