Wall mounting the base – Uniden Cordless Telephone User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Wall Mounting the Base

This phone can be mounted on any standard wall

plate.

1) Snap the wall mount adapter into the notches on the base top.

2) Plug the AC adapter into the DC IN 9V jack.

3) Wrap the AC adapter cord inside the molded wiring channel as shown.

4) Plug the AC adapter into a standard 120V AC wall outlet.

5) Plug the telephone line cord into the TEL LINE jack.

6) Plug the telephone line cord into the telephone outlet.

7) Align the mounting slots on the base with the mounting posts on the wall

push in and down until the phone is firmly seated.

Note: DO NOT use an AC outlet controlled by a wall switch.

Then