Registering tcx905 accessory or extra handsets, Registering other compatible handsets – Uniden Cordless Telephone User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Registering TCX905 Accessory or Extra Handsets
If you purchase an accessory handset, you need to register the handset before use. Only one handset can be reg
istered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre
registered handsets display a handset ID number. Handsets that have not been registered display MODELS VARY!
PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL. (If an accessory
handset has ever been registered to a base, you must reset the handset before you can register it to a new base.
See Resetting the Handsets on page 26.)
When you register an extra handset to the base, the handset ID will be assigned.
1)
Before registering the
TCX905
accessory or other extra handset, the battery pack MUST be charged for 15
20 hours.
2) Place the handset in the base charging cradle to begin registration.
3)
While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
please try these steps again.
Registering Other Compatible Handsets
1) With the base in standby, press the
MENU
soft key.
2) Move the cursor to select REGISTER HANDSET. Press the
OK
soft key.
3) On the handset, press and hold [#] until you hear a beep.
4) While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE, is displayed; the handset has been registered to the base. If REGISTRATION FAILED, appears
please try these steps again.
25