beautypg.com

Kenwood KR-V5560 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

aution: Head this page caretuuy to ensure safe

o,

I (For U.S.A. and Canada]

f ^ Audio section

Rated power output at the STEREO operation

70 watts per channel minimum RMS, both channels driven at
8 O, from 20 Hz to 20,000 Hz with no more than 0.06 % total
harmonic distortions. (FTC)

Power output at the Surround operation

Front (1 kHz, 0.9 % T.H.D. at 8 n)..................... .. 70 W + 70 W
Center (1 kHz, 0.9 % T.H.D. at 8 n).....................................70 W
Rear (1 kHz. 0.9 % T.H.D. at 8 ii)..........________ 20 W + 20 W

Total harmonic distortion (1 kHz, 8 U).... .........0.03 % at 50 W
Signal to noise ratio (IHF A)

PHONO (MM).............................. ........ ............ 75 dB
CD, TAPE, VIDEO................. .. 100 dB

Input sensitivity / impedance

PHONO (MM)........... ......................................... 2.5 mV / 47 kii
CD, TAPE, VIDEO............................................. 200 mV / 47 kO

Tone controls

BASS........................... ................................± 10 dB (at 100 Hz)
TREBU........................... ................... ......... . ± 10 dB (at 10 kHz)

Loudness control at - 30 dB level.....____ ....... + 6 dB (100 Hz)

. 1 Vp - p / 75 O

Video section

VIDEO inputs / outputs (Composite).

FM Tuner section

Tuning frequency range ..................... . 87.5 MHz ~ 108 MHz

Usable sensitivity (IHF)..................... 13.2 dBf (1.2 pV at 75 £1)
50 dB quieting sensitivity

STEREO .............................. 41.2 dBf (32 pV at 75 ii)

Total harmonic distortion at 1 kHz

MONO........................................ ............... .............. 0.6 %
STEREO.......................... ........................................ 0.7 %

Signal to noise ratio at 65 dBf (IHF)

MONO.................................................................................. T5 dB
STEREO ............................................................................. 68 dB

Selectivity (IHF + 400 kHz)................................................ 50 dB
Stereo separation (IHF at 1 kHz)... .................................... 40 dB
Frequency response.......... 30 Hz - 15 kHz, + 0.5 dB, - 3.0 dB

AM Tuner section

Tuning frequency range........................ . 530 kHz - 1,700 kHz
Usable sensitivity....................... 12 pV / (500 p V / m)
Total harmonic distortion......... .............................. ........... 0.7 %
Signal to noise ratio .................____________________ 48 dB
Selectivity.................................................... . 30 dB

General

Power consumption.....................
AC outlet

SWITCHED........................______ 2: (total 200 W, 1.6 A max.)

Dimensions............ ............ ..™..„„„..„„W:440

mm (17-5/16")

H :143 mm

(5-5/8")

D :334 mm (13-1/8")

Weight (net) ................——--------------------------- 9.5 kg (20.9 lb)

(For other countries)

Audio section

Rated power output at the STEREO operation
(EIAJ) 1 kHz, 10% T.H.D., at 8 a.........................100 W + lOOVv
(IHF '66) from 20 Hz to 20 kHz,

0.06% T.H.D., at 8 Q........................... .................. 70 W + 70 Vv

Power output at the Surround operation

Front (1 kHz, 0.9 % T.H.D. at 8 O)...... .............. . 70 W + 70 Vv
Center (1 kHz, 0.9 % T.H.D. at 8 O) .... ................. . 70 Vv
Rear (1 kHz, 0.9 % T.H.D. at 8 O)......................... 20 W + 20 Vv

Total harmonic distortion.......... (1 kHz, 8 Q) 0.03 % at 50 Vv
Signal to noise ratio (IHF'66)

PHONO (MM).............. ............. 75 dE
CD, TAPE, VIDEO ................................ ........... ........... .. 100 dE

Input sensitivity / impedance

PHONO (MM) ................ ..........____................ 2.5 mV / 47 kQ

CD, TAPE, VIDEO.......................................... 200 mV / 47kP

Tone controls

BASS ............................................. ± 10 dB (at 100 Hz)
TREBLE .................................__________ ± 10 dB (at 10 kHz)

Loudness control at - 30 dB level.....____ ___ + 6 dB (100 Hz]

Video section

VIDEO inputs / outputs (Composite)..............! Vp - p / 75 Q

FM Tuner section

Tuning frequency range.......................... 87.5 MHz -.108 MHz
Usable sensitivity (IHF).................... 13.2 dBf (1.2 pV at 75 O)
50 dB quieting sensitivity

STEREO....... .................................... . 41.2 dBf (32 pV at 75 O)

Total harmonic distortion at 1 kHz

MONO ...............................................................................0.6 %
STEREO............................................................................. 0.7 %

Signal to noise ratio at 65 dBf (IHF)

MONO............ ................................ ................... ................ 75 dB
STEREO................................................. .......................... 68 dB

Selectivity (IHF ± 400 kHz).................................... . 50 dB
Stereo separation (IHF at 1 kHz).................................... . 40 dB
Frequency response........ 30 Hz - 15 kHz, + 0.5 dB, - 3.0 dB

AM Tuner section

Tuning frequency range

9 kHz................. ........................... ............ 531 kHz - 1,602 kHz

10 kHz............................. .................. ....... 530 kHz - 1,610 kHz

Usable sensitivity.................................. . 12 pV / (500 pV / m)

Total harmonic distortion .. ..................... ........... ............. 0.7 %
Signal to noise ratio........................... ......... ............__48 dB
Selectivity.... ...................................................... .............30 dB

Generat

Power consumption.......................................................... 260 W

AC outlet

SWITCHED.......................... ................... 2: (total 200 W max.)

(Except for Australia)
Dimensions.......... .................................................... W:440 mm

H :143 mm
D :334 mm

Weight (net)___ __________ ___________ ____ ______ _ 9.5 kg

I

Note

I

KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

This manual is related to the following products: