Canon BJC-8500 - Manual (Page 122)

Troubleshooting 117
T
roubleshooting
Ink Tank BCI-8Y
Ink Tank BCI-8C
Ink Tank BCI-8M
WF BK M C Y
Ink Optimizer Tank BCI-8WF
Ink Tank BCI-8BK
M C Y M C BK
Ink Tank BCI-8Y
Ink Tank BCI-8C
Ink Tank BCI-8M Ink Tank BCI-8PC Photo
Ink Tank BCI-8PBK Photo
Ink Tank BCI-8PM Photo
Standard Colour Set
Photo Colour Set
5 If a cartridge or ink tank is in the wrong position, remove it and insert
it correctly. Then clean the print heads. (☞ 98)
Printer beeps and error lamp lights
If you are sharing the printer on a network, the printer may not display a
message when an error occurs. The printer will only beep. Count the num-
ber of beeps and take action to solve the problem described in the list below.
2 Beeps. The printer beeps twice and the ERROR lamp lights orange when
a paper feed jam or double-feed occurs. Remove the cause of the paper jam.
(☞ 122)
3 Beeps. The printer beeps 3 times and the ERROR lamp lights orange
when one of the ink tanks runs out of ink, or if an ink tank is missing. (☞
92) After you install a new ink tank, press the
RESUME button.
4 Beeps. The printer beeps 4 times and the ERROR lamp lights orange
when a print head error occurs as a result of a BJ Cartridge or an ink tank
not being locked in place. Remove each BJ Cartridge and reinstall it. Make
sure each BJ Cartridge is locked in place. Every time you remove a BJ
Cartridge from the cartridge holder, you must realign the print heads. (☞
49)