beautypg.com

Indicators, Power saving function, Indicators power saving function – Canon A650 IS User Manual

Page 43: P. 41)

background image

Components Guide

41

The indicators on the back of the camera will light or blink under the
following conditions.
• Upper Indicator

• Lower Indicator

This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the ON/OFF button again
to restore power.

* This time can be changed.

Indicators

Green:

Ready to shoot (camera beeps twice)

Blinking Green:

Image recording/reading/erasing/transferring (when

connected to a computer/printer)

Orange:

Ready to shoot (flash on)

Blinking Orange: Ready to shoot (camera shake warning), charging

flash

Yellow:

Macro mode/Manual focus mode/AF lock mode

Blinking Yellow: Focusing difficulty (camera beeps once)

Never do the following while the indicator blinks green. These
actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery

cover

Power Saving Function

Shooting Mode

Powers down approximately 3 minutes after the

last control is accessed on the camera. The LCD

monitor automatically turns off 1 minute* after

the last control is accessed even if [Auto Power

Down] is set to [Off]. Press any button other than

the ON/OFF button or change the camera

orientation to turn the LCD monitor back on.

Playback Mode

Connected to a Printer

Powers down approximately 5 minutes after the

last control is accessed on the camera.

z

The power saving function will not activate during an Auto
Play or while the camera is connected to a computer.

z

The power saving function settings can be changed

(p. 47)

.