Casio CTK-671 - Manual (Page 72)

E-70
703A-E-072A
Problem Possible Cause Action See page
The key or tuning does not match
when playing along with another
MIDI machine.
Parts suddenly drop out during
song memory playback.
Some parts do not play at all dur-
ing song memory playback.
Cannot record Auto Accompani-
ment or rhythm.
Nothing happens when the LAY-
ER or SPLIT button is pressed.
No sound is produced when play-
ing MIDI data from a computer.
Playing on the keyboard produc-
es an unnatural sound when con-
nected to a computer.
Cannot record chord accompani-
ment data on a computer.
1. The tuning or transpose parameter
is set to a value other than 00.
2. Mixer coarse tune, fine tune, and/
or octave shift settings are values
other than 00.
The number of tones being played at
the same time exceeds the keyboard’s
limitation.
1. Channels are turned off.
2. Volume setting is too low.
A track other than Track 1 is selected
as the recording track.
Tracks 2 through 6 are melody tracks.
1. One or more of the melody channels
(2 through 4) is turned off.
2. The volume setting of one or more
of the melody channels (2 through
4) is too low.
3. The keyboard is in record standby.
1. MIDI cables are not connected prop-
erly.
2. Channel is turned off, or volume
setting is too low.
The computer’s MIDI Thru function is
turned on.
Accomp MIDI Out is turned off.
1. Change the transpose or tuning pa-
rameter value to 00.
2. Use the Mixer to change the coarse
tune, fine tune, and/or octave shift
settings to 00.
Use the Mixer to turn unneeded chan-
nels off and decrease the number of
parts being played.
1. Use the Mixer to turn channels on.
2. Use the Mixer to check the volume
setting.
Use the track select buttons to select
Track 1.
1. Use the Mixer to turn on Channels
2 through 4.
2. Use the Mixer to raise the volume
setting of Channels 2 through 4.
3. The LAYER and SPLIT buttons are
disabled during recording and
record standby.
1. Connect MIDI cables properly.
2. Use the Mixer to turn the channel
on, or raise the volume setting.
Turn off the MIDI Thru function on the
computer or turn off Local Control on
the keyboard.
Turn on Accomp MIDI Out.
Page E-62
Page E-37
Page E-35
Page E-35
Page E-36
Page E-47
Page E-35
Page E-36
Page E-46
Page E-66
Pages
E-35, 36
Page E-65
Page E-65