Casio CTK-671 - Manual (Page 36)

E-34
About Auto Harmonize notes and tones
The notes you play on the keyboard are called “melody
notes,” while the notes added to the melody by Auto Har-
monize is called the “harmonize notes.” Auto Harmonize
normally uses the tone you selected for the melody notes as
the tone for the harmonize notes, but you can use the Mixer
(page E-35) to specify a different tone for the harmonize notes.
The harmonize note tone is assigned to Mixer Channel 5, so
change Channel 5 to the tone you want to use for the harmo-
nize notes.
In addition to the tone, you can also use the Mixer to change
a number of other parameters, such as volume balance. See
“Using the Parameter Edit Mode” on page E-36 for details
on these procedures.
❚ NOTE
• The default harmonize note tone when you first turn on Auto
Harmonize is the same tone as the melody note tone.
• Changing the melody tone setting automatically changes the
harmonize note tone to the same setting.
Adjusting the Accompaniment Vol-
ume
You can adjust the volume of the accompaniment parts as a
value in the range of 000 (minimum) to 127 (maximum).
1.
Press the ACCOMP VOLUME button.
2.
Use the number buttons or the [+]/[–] buttons to
change the current volume setting value.
Example: 110
703A-E-036A
A c om p V o l
Current accompaniment volume setting
A c om p V o l
❚ NOTE
• Pressing the ACCOMP VOLUME button or [ ̆] (EXIT) button
returns to the tone or rhythm setting screen.
• Any channel balance settings you make with the Mixer are main-
tained when you change the accompaniment volume setting.
• Pressing [+] and [–] buttons at the same time automatically sets
an accompaniment volume of 100.
[+]/[–]
ACCOMP VOLUME
Number buttons