Casio CTK-671 - Manual (Page 41)

E-39
Saving User Tones
The group of tone numbers from 238 through 247 (User 01
through User 10) is called the “user area” because they are re-
served for storage of user tones. After you recall a preset tone
and change its parameters to create your own user tone, you
can store it in the user area for later recall. You can recall your
tones using the same procedure that you use when selecting a
preset tone.
❚ NOTE
• The keyboard is shipped from the factory with tone number
000 (piano) assigned to the user area.
• Note that creating a user tone (000 to 227) does not change the
preset tone. It creates a new version of the preset tone for stor-
age in the user area.
• You cannot use a drum set tone (228 to 237) as the basis of a
user tone.
703A-E-041A
■ Resonance
Resonance enhances the harmonic components in the vicini-
ty of the cutoff frequency, which creates a distinctive sound.
A larger resonance value enhances the sound as shown in
the figure.
❚ NOTE
• With some tones, a large resonance value can cause distor-
tion or noise during the attack part of the tone.
(3) Tone Pitch Parameters
■ Vibrato Type, Vibrato Delay, Vibrato Depth, Vi-
brato Rate
These parameters adjust the vibrato effect, which causes pe-
riodic changes in the tone.
■ Octave Shift
This parameter controls the octave of all tones.
(4) Tone Characteristic Setting Parameters
■ Level
This parameter controls the overall volume of the tone.
■ Touch Sense
This parameter controls changes in volume and timbre in
accordance with the relative amount of pressure applied to
the keyboard keys. You can specify more volume for stronger
pressure and less volume or a lighter pressure, or you can spec-
ify the same volume regardless of how much pressure is ap-
plied to the keys.
■ Reverb Send, Chorus Send, DSP Line , DSP Type,
DSP Parameter
These parameters control the effects applied to tones.
Level
Cut off frequency
Small Value
Resonance
Large Value
Frequency
Tone numbers
000 ~ 099
00 ~ 99
100 ~ 227
228 ~ 237
238 ~ 247
Tone
Panel Tone
Advanced
Tone
GM tone
Drum Set
User Area
Select the preset tone
Change parameters
Save as an original tone