Casio CTK-671 - Manual (Page 25)

E-23
This keyboard provides you with a selection of effects that
you can apply to tones.
The built-in effects include a wide variety of variations that
give you access to a selection of general digital effects.
Effect Blocks
The following shows how the effects of this keyboard are or-
ganized.
REVERB
Reverb simulates the acoustics of specific types of environ-
ments. You can choose from among 16 different reverb ef-
fects, including “Room” and “Hall.”
CHORUS
The chorus effect gives sound greater depth by causing it to
vibrate. You can choose from among 16 different chorus ef-
fects, including “Chorus” and “Flanger.”
DSP
DSP effects are applied to the connection between the sound
source and output. You can select distortion and modulation
effects. You can create DSP effect setups and also transfer
downloaded DSP data from your computer. The keyboard
has memory for up to 10 DSP effect setups, which you can
store. See “Using the Data Download Service” on page E-68
and “Saving the Settings of DSP Parameters” on page E-26
for more information.
Selecting REVERB and CHORUS
Perform the following steps to select REVERB or CHORUS.
1.
Press the button (REVERB or CHORUS) for the
effect you want to select, so the button’s indica-
tor is shown on the display screen.
• An indicator is on the display next to REVERB or
CHORUS when the effect is turned on. The indicator
is not displayed when the corresponding effect is
turned off.
Example: Indicator after the REVERB button is pressed
2.
Use the [+] and [–] buttons or the number but-
tons to scroll through the effects until the one
you want is displayed, or use the number but-
tons to input the effect number you want to se-
lect.
• See the list on page A-10 for information about the
types of CHORUS and REVERB effects that are avail-
able.
• Here you could also change the parameters of the ef-
fect you selected, if you want. See “Changing the Set-
tings of REVERB and CHORUS Parameters” for more
information.
on
off
DSP Line
16ch
Sound Source
DSP
REVERB
CHORUS
EQUALIZER
Output
Applying Effects to Tones
703A-E-025A
Lit
[+]/[–]
REVERB
CHORUS
DSP
Number buttons