Casio CTK-671 - Manual (Page 47)

E-45
703A-E-047A
Setup Names
You can assign setups into one of 16 areas, which you can
select using BANK buttons 1 through 4 and the four REGIS-
TRATION buttons. Area names range from 0-1 through 3-4
as shown below.
1 Use the BANK button to select the bank. Each press of
BANK cycle through the bank numbers from 0 to 3.
2 Pressing one of the REGISTRATION buttons (1 to 4) se-
lects the corresponding area in the currently selected bank.
❚ NOTE
• Whenever you save a setup and assign it a setup name, any
setup data previously assigned to that name is replaced with
the new data.
• You can use the keyboard’s MIDI capabilities to save your set-
up data to a computer or other external storage device. See
“Using the Data Download Service” on page E-68 for details.
To Save a Setup in Registration
Memory
1.
Select a tone and rhythm, and otherwise set up
the keyboard the way you want it.
• See “Registration Memory Settings” on page E-44 for
details on what data is stored in the registration mem-
ory.
2.
Use the BANK button to select the bank you
want.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the display
returns to the contents in step 1, above.
• Bank 1 selected.
BANK STORE
2 1
0-1 0-2 0-3 0-4
1-1 1-2 1-3 1-4
3-1 3-2 3-3 3-4
2-1 2-2 2-3 2-4
1 2 3 4
BANK 0
BANK 1
BANK 2
BANK 3
B a n k
S t o r e
3.
While holding down the STORE button, press a
REGISTRATION button (1 to 4).
• The following display appears when you press the 2
button.
4.
Release the STORE and REGISTRATION buttons.
❚ NOTE
• The setup is saved as soon as you press a REGISTRATION
button in step 3, above.
To Recall a Setup from Registration
Memory
1.
Use the BANK button to select the bank.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the keyboard
automatically clears the registration memory recall
screen.
2.
Press the REGISTRATION button (1 to 4) for the
area whose setup you want to recall.
• The setup name along with the message “Recall” ap-
pears on the display.
❚ NOTE
• If you press a REGISTRATION button without using the BANK
button to select a bank first, the last bank number selected is
used.
B a n k
R e c a l l