Casio CTK-671 - Manual (Page 21)

E-19
Phones/Output Terminal
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
Rear Panel
Connecting Phones 1
Connecting phones cuts off output from the keyboard’s built-
in speakers, so you can play even late at night without dis-
turbing anyone.
Audio Equipment 2
Connect the keyboard to a audio equipment using a com-
mercially available connecting cord with a standard plug on
one end and two PIN plugs on the other end. Note that the
standard plug you connect to the keyboard must be a stereo
plug, otherwise you will be able to output only one of stereo
channels. In this configuration, you normally set the input
selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
Musical Instrument Amplifier 3
Use a commercially available connecting cord to connect the
keyboard to a musical instrument amplifier.
❚ NOTE
• Be sure to use a connecting cord that has a stereo standard
plug on the end you connect to the keyboard, and a connector
that provides dual channel (left and right) input to the amplifier
to which you are connecting. The wrong type of connector at
either end can cause one of the stereo channels to be lost.
❚ NOTE
• You can also connect the keyboard to a computer or sequenc-
er. See “MIDI” on page E-66 for details.
OUT IN SUSTAIN/
ASSIGNABLE JACK
MIDI PHONES/
OUTPUT
DC 9V
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
White Red PIN plug
Stereo standard
plug
Audio connection
PHONES/OUTPUT Terminal
Keyboard amp,
guitar amp, etc.
1
2
3
Connections
INPUT 1
INPUT 2
PIN jack PIN plug (red)
PIN plug (white) Stereo standard plug
Keyboard or
guitar amp
To keyboard’s
PHONES/OUTPUT
terminal
Standard plug
When connected to a musical instrument amplifier, set the
volume of the keyboard to a relatively low level and make
output volume adjustments using the amplifier’s controls.
Connection Example
703A-E-021A