Sharp Aquos LC 42D43U - Manual (Page 39)

Useful adjustment settings
mmom
AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors iike room brightness,
type of program watched or the type of image input
from external equipment.
o o
--------- FAVORITE CH -----------------
© © © ®
FAVORITE
o
SLEER AiJDIO .IVK'ODE CC
o o o o
Press AV MODE.
* Current AV MODE displays.
«■:: i Press AV MODE again before the mode
- ■ ■ ■■■ displayed on the screen disappears.
• The mode changes as shown below.
When the input source is TV, INPUT 1, 2 or 3 terminals
(Example)
Ay.MOOESTAMDARO'
^ I____ [_
S^lsOted.item.
STANDARD For a highly defined image In a normal
lighting
[Enhanced Picture Contrast: on]
MOVIE For a movie
[Enhanced Picture Contrast: off]
GAME Lowers image brightness for easier viewing
[Enhanced Picture Contrast: off]
PC For PC
[Enhanced Picture Contrast: off]
USER Allows the user to customize settings as
desired. You can set the mode for each
input source.
[Enhanced Picture Contrast: off]
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC For a clear-cut image emphasizing high
contrast, useful for sports viewing
[Enhanced Picture Contrast: on]
; ihputiSignai vitor ; PCvinput-
■ mode onlyl'■ ■ ■■■ ■■'■" ...........
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024x768 1360x768
When the input source is INPUT 4, 5 or 6 terminals
(Example)
L
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen, and
then press -4f>- to select “Setup”.
Press A/T to select “Input Signal”, and then
press ENTER.
Press A/T to select the desired input signal
on the display.
You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
“Enhanced Picture Cotitrasf technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
Press MENU to exit.
38