Sharp Aquos LC 42D43U - Manual (Page 24)

Basic adjustment settings
vChannel ■Setup........
You can run EZ Setup again, even after setting up the
preset channeis.
CD ® W
® €£) ®
-D ■-■I;
O ® @
INPUT FIASH3ACK o o
FREEZE
O
MENU
O
GXiT ---- !-r^RSriURN
O O
Language setting
Seiect from among 3 languages: English, French and
Spanish.
Press MENU to display the MENU screen, and
then press <4/^ to select “Setup”.
Press to select “EZ Setup”, and then
press
ENTER.
» if you already set the Secret No., go to step 3. if
not, skip to step 4.
Input the 4-digit secret number by using 0-9.
ih i i Press Ah▼ to select the desired ianguage
* listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
;; .'¿yy Press to select “Air” or “Cable”,
y.-ip-h: Press
ENTER to enter the setting.
Ciiaitnel search
Channel auto search makes the "IT/ look for all
channels viewable in the set area.
0 When “Air” is seiected in Antenna setting:
.......... Press to select “Start”, and then press
ENTER.
When “Cabie” is selected in Antenna
setting:
Press a /T to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
» The Channel search wii! start automatically.
» To exit the Channel search screen, seiect “Cancel”,
and then press ENTER.
Press MENU to exit.
if no channel is found, confirm the type of connection made
with your TV and try EZ Setup again,
if you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
1
Press MENU to display the MENU screen, and
then press <
4
/^ to select “Setup”.
Press A/T to select “CH Setup”, and then
press ENTER.
* If you already set the Secret No., input the 4-digit
secret number here. See page 41 for setting a
secret number.
Press A^T to select “Air/Cable”, and then
press ENTER.
Press -
4
/^ to select “Air” or “Cable”.
Press ENTER to enter the setting.
Press MENU to exit.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
:■: Repeat steps 1 and 2 in Antenna setting in
W Channel Setup.
Press A^T to select “CH Search”
press ENTER.
and then
When “Air” is selected in Antenna setting:
Press -
4
/^ to select “Start”, and then press
ENTER
When “Cable” is selected in Antenna
setting:
Press a /T to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER.
» The Channel search wiil start automaticaliy.
« To exit the Channel search screen, select “Cancel”,
and then press ENTER.
Press MENU to exit.
If no channel is found, confirm the type of connection made
with your TV and tty channel search again,
if you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
m - 23