Sharp Aquos LC 42D43U - Manual (Page 31)

Using external equipment
■; Pisfiiiayingsafi; Extern aqylpment;; ■
To vio'.v oxti;rru.il ooui'co iiTiCiges, select the input
source from INPUT on the remote control unit or on
the TV.
" ' INPUT FLASHBACK ® o
SURROUNC
o
FREEZE
O
l.’UNU
O
Q
EXIT
o
RETURN
O
D C □ O dJ
POWER
Press INPUT
• A list of selectable sour<;es appears.
flnputiSpleet:;
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the “Input
Select” menu.
11 La : ■/ Press MENU to display the MENU screen, and
’ then press -4/p- to select “Option”.
Press £/T to select “Input Select”, and then
press ENTER.
Press A/T to select the signal type you want
to set, and then press ENTER.
* If the selected signal type is incorrect, images are
not displayed or displayed without any color.
Press MENU to exit.
* The setting is stored and can be selected on the
“INPUT SOURCE” menu.
* Refer to your external equipment operation manual for the
signal type.
• if you set INPUT 1 or 2 to Auto, the TV will automatically
select the input signal.
» Setting INPUT 1 or 2 signal selection to “Auto” when
other equipment Is connected will result in the following
connection priority.
INPUT 1 or 2:
® COMPONENT VIDEO
(2) VIDEO
2
Press INPUT again to select the input source.
® An image from the selected source automatically
displays.
• Each time INPUT is pressed, the Input source
toggles.
• You can also select the Input source by pressing
A/T.
® If the corresponding Input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
® See pages 14 and 15 for external equipment connection.
(D- 30