Sharp Aquos LC 42D43U - Manual (Page 28)

Basic adjustment settings
- Advanced -picture: adjustmeirits
Tl'iis TV [:)rc-vic.lt7s various advanced functions for
optimizing the picture quality.
: Press MENU to display the MENU screen, and
■ then press to select “Picture”.
2
.^■3
Press a /T to select “Advanced”, and then
press ENTER.
Press A/T to select a specific adjustment
item, and then press
ENTER
• You can select “Color Temp.”, "Black”, “l/P
Setting”, "Film Mode”, "3D-Y/C”, “Monochrome”,
or “Range of OPC”.
Press (or to select the desired
parameter.
* See the table for the selectable parameters.
Press MENU to exit.
yCpIoT-TeiTiperdiure
For ,;i I.•j
0
ttйr wl'iite balai'icc
correction.
i.-isc oolcr tci I iperatui'e
■S'e-leicited.item
High
Mid-High
Middle
Mid-Low
Low
L-oconu-.i'.ii
Whits with Bluish tons
White with Reddish tone
I Slack':
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
S-eledtedi item ...................... Description --. -. -. -. -. -. -. -. -. -. -.
On For high detail in black portions
Off No adjustment
(l/P; Se-U.i.n.g.t
■>iMVert.s infjut signals liep-ending Г!!! lira ty|;-
mar.ies.
Setected iterti^
Fast Suitable for fast-moving images
Slow Suitable for smooth images with low
amounts of flickers
"i/P Setting” is not selectable w/hen channel display show/s
an Input resolution of 480P, 720P, or 10801.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Selected lieiT!
On
Off
Description
Detects, analyzes, converts film source
Normal viewing mode
» “Film Mode” does not function when you set:
— the “AV Mode" to “Game” or
— the "i/P Setting” to “Fast”.
i3D;-Y/Gh
Pi'/jvldcs I ligl I c|i lalily imaya.s
and cross color noise.
i I n ■: lcl c.rv.iwl
Selected item-
Slow
Standard
Fast
Off (2D)
Descflptich -I
For still Images
Normal adjustment
For moving Images
For Game Mode
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
■ jMonoehrorfie; /; ■ ; rt c ■: ;:
For viewing a video in monochrome.
Selected lie iti
On
Off
For viewing in monochrome
Normal color
FRarige'of-:©P.0 : з / 1 . :'.': (- / J ((i: / (у:::;j h f - f c
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of +16 and a minimum of -16.
El.-h. ........................Descfiptibh...........................
Max. -15 through +16
Min. -16 through +15
» The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate If the adjustment range is
small.
27