Appendix, Bemoving the stand, Lc-46se94u/lc-52se94u – Sharp Aquos LC 46SE94U User Manual
Page 46: Lc-65se94u, Removing the stand
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendix
Bemoving the Stand
» Before detaching (or attaching) the stand, unpiug the AC cord from the AC INPUT terminai.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
■ LC-46SE94U/LC-52SE94U
Before
attachlng/detaching
the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to iay the TV on. This wili prevent it from being
damaged.
1
Hex key
n
1?
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop
trom the edge of the base area.)
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
To attach the stand, perform the above steps in reverse order.
■ LC-65SE94U
Before attaching/detaching
the
stand
• Before performing work, make sure to turn off the TV.
1
secure the stand in place.
Detach the stand from the TV.
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
To attach the stand, perform the above steps in reverse order.
O- 45