Using digital audio òu, Connecting hdmi equipment, Connecting a pc – Sharp Aquos LC 46SE94U User Manual
Page 15: Using digital audio output, Connecting hdmi equipment connecting a pc, Wimi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Using Digital Audio Òu^
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio
WiMi§
•
Depending on the connected equipment, audio wiii not output from the DIGITAL AUDIO OUTPUT terminal In HDMi
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
Connecting HDMI Equipment
You can use the INPUT 4, INPUT 5 or INPUT
6
terminal when connecting HDMI equipment.
* When using an HDMLDVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
* To enjoy the AQUOS 1080p display capability, connect your Biu-ray disc player, HD-DVD player or other external equipment
using an HDMI-cert if led cable and set the equipment to 1080p output.
Connecting a PC
When
connecting
to
a PC
with an anaiog
RGB
terminai (INPUT 7):
When connecting to a PC with an HDMI terminal (INPUT 4, 5 or 6):
•
• The HDMI terminals only support digital signal.
• Refer to page 50 for a list of PC signals compatible with the TV.
14