Sharp Aquos LC 46SE94U - Manual (Page 16)

Watching TV
Turning On/Off the Power
. TV POWER
(On/Standby)
Press POWER on the TV, or TV POWER on the remote control unit to
turn the power on.
* POWER indk;ator (Blue): The TV is on. (After a few seconds, a window
appears with sound.)
« The initial setup starts when the TV powers on for the first time, if the TV has
been turned on before, the EfZ Setup will not be invoked. See page 24 for
performing EZ Setup from the Setup menu.
Press POWER on the TV, or TV POWER on the remote control unit
again to turn the power off.
* The TV enters standby and the image on the screen disappears.
*
The POWER indicator on the TV turns off.
TV J r AUDIO
/ -------- FWCllCN
ky ° ° o
SOURCE ______ LIGHT
e §9 s)
Initial Setup
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press TV POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page t
2. Connect the antenna cable to the TV. (See page 12.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
« If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
« Weak electric power Is still consumed even when the TV is turned off.
Air/Cable (Antenna setting)
Make sure what kind of connection Is made with your TV
when selecting "Air" or "Cabie".
3
Press to select "Air" or "Cabie"
~ ;ENTEF Pre ER to enter the setting.
Example
FREEZE
O
MENU
O
0®
I.-1 -v.th
Air/Cable '
CH w
EXIT
o
RETURN
O
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1
Press to select the desired language listed on the
screen, and then press ENTER.
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
4
When "Air" is selected in Antenna setting:
Press to select "Start", and then press ENTER.
Language '................. l.”-<
CH Search liliE
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV.
2
Press -^/p- to select "Home" or "Store".
Press ENTER to enter the setting.
Example
vVbe:: "P-aLTir" !c seiacted in Antenna setting:
Press ^¡'W to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
“Analog Search Start” to search only analog broadcasts,
and then press ENTER.
I |•-ПiíSy•■
VI
CH r, •!
H ' l v "km
Ai-C ./in
CH Search ........
nalog & Digital
;■ you seioct "Home", AV MODE is set to "STANDARD".
If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 30 minutes,
AV MODE will change to "DYNAMIC (Fixed)' automatically.
For changing the TV Location after the setting, see "EZ
Setup" on page 24.
The Channel search will start automatically.
To exit the Channel search screen, select "Cancel",
then press
ENTER.
and
if no channel is found, confirm the type of connection made
with your TV and tty EZ Setup again.
(See page 24.)
)- 15