Step 1, 3 setting up the mfc, Attaching the paper tray – Brother MFC-4420C User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

o Remove the protective tape.

Do NOT connect the USB cable.
Connecting the USB cable is done

when installing the driver.

Attaching the Paper Tray

o Insert the paper tray from above into the

back of the MFC.

You can load up to 100 sheets of 20 lb

(75 g/m

) paper.

For more details, see “Paper Capacity of
the Paper Tray” in Chapter 2 of the User’s

Guide.

o Fan the stack of paper well to avoid paper

jams and misfeeds.

2 Unfold the paper support and then press

and slide the paper guide to fit the paper

width.

3 Gently insert the paper.

Make sure the print side is towards you and

the paper is below the maximum paper

mark.