Step 2 2, Mac^ os 8.6 - 9.2 users, O double-click the mfl pro suite driver – Brother MFC-4420C User Manual
Page 23: For mac® os 8.6 - 9.2 users, Step 2, Installing the driver & software
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2
2
%|For
Installing the Driver & Software
Mac^ os 8.6 - 9.2 Users
Make sure that you have completed the instructions from Step 1 “Setting Up
the MFC” on pages 2 to 9.
1
Unplug the MFC from the AC outlet and
disconnect it from your Macintosh if you
already connected an interface cable.
2
Turn on your Macintosh®.
e Insert the supplied CD-ROM into your
CD-ROM drive.
O Double-click the MFL Pro Suite Driver
Installer icon to install the printer and
scanner drivers.
5 After the installation is completed, restart
your Macintosh®.
Connect the USB interface cable to your
Macintosh®, and then connect it to the MFC.
0
Do not connect the MFC to a USB
port on a keyboard or a non powered
USB hub.
2 Turn on the MFC by plugging in the power
cord.
8 From the Apple® menu, open the Chooser.
22