Brother P-TOUCH PC - Manual (Page 19)

Escape sequences
Sequence Function Description
ESC+J+n Line feed Feeds line by 24 dots; invalid when the print
buffer is empty; does not move to the beginning
of line.
Any value can be used for n.
ESC+$+n1 +n2 Absolute position Moves by n1+256xn2=N dots (1/60 inch) from
the beginning of the line.
0
The target position must be inside the page or
else an error is detected.
ESC+\+n1 +n2 Relative position Moves by n1-i-256xn2=N dots from the current
position. N is a signed integer. For a negative
number (-N), use 65536-N
0The target position must be inside the page or
else an error is detected.
ESC+*+m+n1+n2
+data bytes
Selects bit image
printing Prints the bit image data “data byte”.
m=39 is the only valid value. Other values result
in the command being ignored.
n1=total number of dots modulus 256.
n2=total number of dots/256 (integer).
(n1-h256xn2)x3 image bytes are required.
Detects a print buffer error if the image extends
beyond the page limits.
ESC+@ Initialization Clears all data in the print buffer.
ESC+i+D+byte Print density and bar­
code controls
bit 0 ~3: Print density control (default=3)
0: no change
1 ~5: five levels (other values invalid)
bit 4 and 5: Barcode control (default=3)
0: no change
1: no barcode
2: barcode only
3: including barcode
1 6