Software – Brother P-TOUCH PC User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Software
Printing
Print type:
Print condition:
Bit image only
Auto tape cut: ON / OFF
Left and right margins: small, medium, large, none
Buffer
*Print buffer (normal):
Approximately 30KB (27 cm)
**Reception buffer;
512B
Transmission
Baud rate;
9600 (fixed); data reception at 9600 bps
control
Busy output:
Xon/off and DTR
Length:
8 bits (fixed)
Parity:
none (fixed)
Commands
CR
Carriage return
LF
Line feed
FF
Print command
CTRL-Z
Print command with feed
ETX
Same as CTRL-Z
ESC J
Line feed
ESC$
Absolute position assignment
ESC\
Relative position assignment
ESC*
**
Bit image selection
ESC@
Initialization
E S C i S
Status request
E S C i M
Mode specification
E S C i D
Print density control
E S C i P
Printing command for continuous page
Others
Tape cut ON / OFF
Tape end detection
Cutter error detection
Tape type / Tape detection (with or without)
*Print buffer: stores the print image that is printed by the thermal head
**Reception buffer: stores a received interface data temporarily until it is sent to the print
buffer
1 3