Kenmore 415.1613911 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Unscrew electronic ignition cap on cart right side panel. Insert AA battery into ignitor, negative(-) end

first. Replace the cap.

Electronic Ignition Cap

LP TANK IS SOLD SEPARATELY. Fill and leak check the tank before attaching to grill and regulator (see
Use & Care section).

Once tank has been filled and checked for leaks, slide tank tray in bottom shelf forward. Fully loosen tank

screw at bottom of tank tray. Insert tank into tray with tank valve facing to right side of cart. Secure tank
by tightening tank tray screw. Connect regulator to tank as described in Use and Care section. Slide tank

shelf back into place.

See Use & Care section of this manual to perform the "Burner Flame Check" and for important safety
instructions before using.

Tank Screw at bottom of tank tray

Always keep LP tank in upright position during use,

transport, and storage.

CAUTION

LP Tank valve must face to right side of

cart once tank is attached. Failure to

install cylinder correctly may cause gas

hose to be damaged in operation,
resulting in the risk of fire.

•' Tank

.(hot includec

464224211 • 19