Problem, Troubleshooting – Brother SX-4000 User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING

Problem

Solution

Nothing happens when power

switch is turned on

1. Is the power cord plugged in?

Poor printing performance

or printout is impossible

1. Is the daisy wheel properly installed?

(Has the lever been pressed firmly?)

2. Have you run out of ribbon?

Try to press [CODEI + [RESETl (Q) to

detect the home position of the carrier.

Poor correction performance

1. Has the correction tape been properly

installed?

2. Have you run out of correction tape?

Are you using the proper correction

tape?

Try

to press [CODE] + [RESET] (Q) to

detect the home position of the carrier.