Brother SX-4000 - Manual (Page 32)

DISPLAY MODE
It is impossible to select the line-by-line mode if the carrier is not
between the margins.
PITCH UNE WORQ иМС1Л OPERATE
10 16 1 2 бШЯ SPaL WORD BOLD AUTO
Indication Meaning
OFF Printing mode, manual return only
AUTO (A) Printing mode, auto carrier return function activated
UL (▼) Display mode (line-by-line), auto carrier return
function activated
Press [ALT! + [OPERATE] until “L7L” is selected.
2) Type your text. The carrier moves for each character entered. Input
characters are not printed right away, which means that entries can be
corrected before being printed. See “Correction in display mode” (p.31).
3) Pressing ITAB] or [RETURN] prints the text and moves the carrier to the
next tab or to the next line.
In line by line mode, the automatic carrier return function is always
activated.
Pressing the hyphen key in the hot zone displays a “ghost hyphen” (3-
dot hyphen). This hyphen does not trigger a carrier return immediately
as in printing mode. However, if you type anything after this hyphen,
printing and carrier return will be triggered. The hyphen will be printed
at the end of the line, and the character you typed after it will appear
at the first position of the display.
4) To cancel the line-by-line mode, print the displayed text, then press [ALTI
+ [OPERATE] to delete the indicator under “OPERATE”, or to select the
“AUTO” mode. This turns the display off and recalls the printing mode.
30