Correcting one character, Relocation, Erasing one word – Brother SX-4000 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORY CORREUiiuiy
Your typewriter has a full-line correction memory that makes corrections easier.
As long as you are on the current line, the machine will automatically erase for
you. In addition, you may choose to erase automatically a single character, one
word, or the entire line.
Correcting one character
CORRECT
1) Use
[BACKSPACE!
or
[SPACE BAR]
to line up the carrier with the
mistyped character.
2) Press
[CORRECT].
This automatically erases the mistyped character and
leaves a blank. Super/subscripts, underlined and bold characters can be
deleted with this function, as well as regular characters.
3) Type in the correct character.
• To erase a series of characters, merely hold down
[CORRECT].
The
carrier will backspace and correct continuously until you release the
key.
Relocation
OPERATE
RELOC
BS1£
The
[RELOC]
key allows you to move to the end of your typing line rapidly.
Press
[RELOC]
to return the carrier to the place where it was before the
correction.
Erasing one word
'"V
woin^
LOUT
The word out function allows you to erase one word at a time.
1) Using
[BACKSPACE]
or
[SPACE BAR]
, move the carrier to the space right
after the word to be deleted. (The /s triangle in the following illustration
indicates the location of the carrier.)
cal formulas. Most people feel
20