Replacing the cassette daisy wheel – Brother SX-4000 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REPLACING THE RIBBON. ETC.

Replacing the cassette daisy wheel

The daisy wheel is housed in a clear plastic cassette for easy, damage-free

handling and quick typeface changes.

To replace the cassette daisy wheel:

1) open the top cover.

2) Pull the lever towards you to release the

daisy wheel lock.

3) Remove the cassette daisy wheel by pull

ing it out of the machine by the protruding

“ear" on the top right.

Insert the desired cassette daisy wheel

into the slot and press down gently.

5) Slide the lever back to its original position

to lock the cassette daisy wheel in place.

Make sure to press the lever firmly.

6) Close the top cover.

7) Press [CODE] + IRESETl (Q) to move the

carrier to the previous position.

Make sure the cassette daisy wheel is not

inserted backwards. The “ear” should
always be on the upper right.

Improper insertion of the cassette daisy
wheel may cause malfunction and incorrect

printing.

It is not necessary to remove the cassette

ribbon when replacing the daisy wheel.

NOTE

Please check the shape of your daisy

wheel cassette before replacing the daisy

wheel. The daisy wheel cassette type B

cannot be used with this machine.

Type A

TypeB