Brother SX-4000 - Manual (Page 25)

LAYUUl tUiyL:iIUiya
Superscript/Subscript
Q - O
Superscripts and subscripts are used mainly for scientific
text composition (for instance, exponents, chemical sym­
bols, or reference to footnotes).
To print a superscript, press [CODE] + [,] (comma) to raise the carrier by 1/12
inch, and then type the character that you want in superscript.
To print a subscript, press [CODE] + [.] (period) to lower the carrier by 1/12
inch, and then type the character that you want in subscript.
^20^42
To restart normal typing: After typing a superscript, press [CODE] + [.] (period).
After typing a subscript, press [CODE] + [,] (comma). This will move the paper
back to normal position.
In super/subscript mode, the carrier will always move by 1/12 inch,
regardless of the current line spacing.
Super/subscripts of more than 1/12 inch are not possible. The beep will
sound if you press twice on [CODE] + [J / [CODE] + [.].
If you wish to move the carriage more than 1/12 inch, use [CODE] +
[INDEX] (P) or [CODE] + [REV] (O). However, in this case, the
correction memory will be cleared.
Special characters
CODE
Green
+ character
key
To type the special characters and symbols marked in green on the bottom of
certain keys, hold down
[CODE] and press the desired key.
Character Keys Character Keys
< CODE + W § CODE +Z
IT CODE + Y 2 CODE + X
>■ CODE -1. U 3 CODE + V
23