Pioneer SX-209RDS User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RDS (Radio Data System) BROADCAST RECEPTION
MEMORIZING A DESIRED BROADCAST
STATION NAME (Manual Station Name
Memory)
For each of the 30 preset AM/FM channels, up to four characters
can be mennorized for preferred broadcast station names. Even if
PS data is already received using RDS, an FM broadcast station
name can still be memorized.
In this case, the memorized name takes priority over the PS data
name.
2,6
1. Turn the POWER switch ON and press the TUNER
button.
2. Select the desired broadcast station with the
CLASS button and STATION -/+ buttons.
3. For FM broadcasts, press the DISPLAY MODE
button on the remote control unit to select the
RT mode or PS mode.
4. Press the CHARACTER/SEARCH button.
'INPUT" lights in the display, and the mode switches to manual
station name memory.
5. When "INPUT" is displayed, use the TUNING +/-
buttons to select a desired character within 5 sec
onds.
® The first character in the display changes each time you press
the TUNING +/- buttons. Select character as desired.
(D When you have selected your character, press the MEMORY
button.
This enters the first character and awaits input of the next
character for memorization.
Repeat this procedure until all four characters have been entered.
After the four characters have been entered, the MEMORY indi
cator automatically lights.
6. Use the CLASS button and STATION +/- buttons to
select the station number you want to name.
The MEMORY indicator goes out, and the characters are memo
rized.
•
When memorizing a station name during AM broadcast re
ception, perform procedures 1, 2, and 4 to 6 as above.
When erasing a memorized station name, use the
following procedure.
® Perform steps 1 to 4 of "MEMORIZING A DESIRED BROAD
CAST STATION NAME".
(D While "INPUT" Is displayed, use the STATION (-/+) buttons to
display a space.
(D Press the MEMORY button. (One space is input.)
(D Repeat procedures 2 and 3 three more times to input four spaces.
(5) Press the CLASS button and desired broadcast station (ch)
with the STATION button. (Memory mode has finished.)
•
When you want to change a memorized station name, select
the desired broadcast station, and register the new name us
ing procedures 2 to 6.
•
For greater convenience, record memorized station names in
the STATION CALL button "memo" on page 17.
- TUNING +
- STATION H
JDIRECTJ fcg;ss>m
STEREO TUNED
r It / r.7 1 / r
RDS
± /W / L J 1
— ch
L“T-J
[CLASS
>
-¿JC STEREO TUNED
MEMORY RDS
1 / r T'
1
/AÍ
* — ch
jDIRECTJ
n n n n
I'// I / ”
::i o. Lj u I I ri
i.
L°'TJ
1
class
") d] STEREO TUNED
RDS
1 1 r' T' r ,
//W /„ „1 i (ch
14